How does a nitrogen 三公 work

are suitable for: nitrogen generator matching, oxygen generator matching, chemical industry, food, rubber, grain, oil and food, cigarette and wine, aquaculture, mechanical metallurgy, petrochemical, textile printing and dyeing, electronic equipment, transportation and telecommunications, scientific research institutions and other departments that need to purify the air source.

How does a nitrogen 三公 work?
What are the characteristics of nitrogen 三公?
What are the precautions for using nitrogen 三公?

How does a nitrogen 三公 work?

The nitrogen 三公 is an oil-free, reciprocating piston, single-acting, air-cooled 三公, designed for industries that require a clean air source and higher environmental requirements; this machine can further pressurize the lower pressure nitrogen to make Its pressure can meet the needs of industrial production, and it has a closed structure, leak-free operation, low noise and stable operation. Industries that require pure, high-pressure gas can use nitrogen 三公s.

What are the characteristics of nitrogen 三公?

The nitrogen 三公 is completely oil-free, green and pollution-free, and does not need to be lubricated. The friction seals such as piston rings and guide rings of the nitrogen 三公 are made of special materials with self-lubricating properties, which do not affect the gas composition

The structural advantages are reflected in:

Nitrogen 三公 The entire compression system is not lubricated by thin oil, avoiding the possibility of oil contacting with high pressure and high purity nitrogen
The whole system of nitrogen 三公 has simple mechanical structure, convenient control and convenient operation;
The nitrogen 三公 has no pollution for the compressed gas medium, and the purity of nitrogen at the inlet and outlet of the 三公 is the same.

What are the precautions for using nitrogen 三公?

The nitrogen 三公 should use a lifting device with a bearing capacity greater than the weight of the unit, and its hoisting speed and acceleration should be limited within the allowable range.
Try to install the nitrogen 三公 in a cool, clean and well-ventilated place to ensure that the air sucked by the 三公 is clean and has the lowest moisture content.
The air inhaled by the nitrogen 三公 must not contain flammable gas and corrosive gas, so as to avoid explosion or internal rust.
It is better for the air cooler to have an exhaust fan or an air duct to discharge the hot air outside to prevent the hot air from circulating into the tuyere.
The discharge of waste water and waste oil from the nitrogen 三公 must comply with the regulations of the local environmental protection department.
The nitrogen 三公 uses a three-phase AC power supply of 380V, 50Hz. The power supply line of the bleed air 三公 must be equipped with air switches, fuses and other safety devices to ensure the reliability and reliability of the electrical equipment, and must be reliably grounded.
The normal use of nitrogen 三公 is inseparable from clean compressed air, so it is very important to use the 三公 correctly.